Two component WB primer / filler
The purpose of the IC5200 is to promote the Topcoat adhesion to problematic substrates.
By adjusting this Primers‘ viscosity (diluting less), small porosities and pinholes will also be filled.
The purpose of the IC5200 is to promote the Topcoat adhesion to problematic substrates.
By adjusting this Primers‘ viscosity (diluting less), small porosities and pinholes will also be filled.
It presents several advantages :
– Short drying time
– Odorless after a couple of minutes
– Easy to mix ratio. Then add a little water and it’s ready for spraying
– Long pot-life : around 4 hours depending on room conditions
– Spray guns can simply be rinsed with water after application.
– No thinner required
Lead time is 48 hours : the shortest in the industry.